Put some power into your plow with SuperATV’s Plow Pro UTV Plow Angle Actuator Kit. This add-on for your Plow Pro blade makes it easy to adjust your plow angle right from the cab. It delivers up to 1,800 pounds of pure pushing power to ensure you always get the angle you need easily in just a few seconds. The hydraulic actuator is controlled with a rocker switch in your cab and sports an IP67-rated solenoid so you can count on it all winter long.
Robust and Powerful
Any plow part needs to be tough, and we didn’t cut any corners with our actuator kit. It uses an IP67-rated solenoid along with water-resistant wiring harness connectors. The 3/4” chrome-plated cylinder shaft is sealed to prevent water and dust intrusion, and it’s tough enough to take big hits without breaking down. Plus, the actuator is capable of 1,800 pounds of force, so you can set it to the perfect angle easily and it stays there no matter what you hit.
This thing is easy to install—it replaces the whole manual adjustment arm which takes just minutes to get done. Once it’s wired, you can adjust to any position up to 30 degrees left of right of center even when you’re on the move. You always get the exact angle you need when you need it.
Stay Warm and Work Less
Adjusting your plow with the dash-mounted rocker will be the easiest thing you do all day. Plus, when you can get the whole driveway cleared from the comfort of your cab, you save your back, your fingers, and your toes from hard work and frigid temps.
Winter has never been easier than with a SuperATV Plow Pro Snow Plow installed on your Yamaha Wolverine RMAX 1000. This winch-operated snow plow kit has a 72” blade that operates at multiple angles, making easy work of any job. Installing the mount is easy and our quick-connect blade can be attached or removed in a matter of minutes. Your side-by-side will be ready to clear any space, big or small, as soon as that first snowflake falls.
Super Strong and Built to Last
Snow plows take a beating, so we designed this one to be as tough as possible. The blade can be attached or removed in minutes. It's made from 10-gauge steel and the cutting edge uses a 4-gauge advanced steel alloy that can hack through the most stubborn, hard-packed snow with ease. The reinforcing ribs on the back ensure it won’t buckle under extreme abuse. This UTV plow kit even features shock-absorbing springs and a tilt-forward design, so bumps or small obstacles won’t slow you down. Plus, all mounting components are powder coated for corrosion resistance.
- 10-gauge steel blade
- 4-gauge leading edge
- Flip-forward design
- Two 4-gauge vertical ribs support high-impact areas
- 10-guage horizontal support reinforces the leading edge
Multiple Plowing Angles
Our Yamaha RMAX snow plow blade can be used at seven different angles, ranging from 0 to 30 degrees, making it easy to clear even the most hard-to-reach spaces. The adjustable tilt makes it easy to keep the skid shoes flat on the ground even if you have up to a 3” lift. This system is precision engineered for quick and responsive operation because we believe in working smarter, not harder.
- Seven adjustable plowing angles:
- 0°, 10°, 20°, & 30° left or right of center
- 52° to 65° adjustable attack angle
- Height-adjustable skid shoes
Simple, Bolt-On Installation
The weather is unpredictable, so you want a snow plow kit that’s ready to go to work at a moment’s notice. The mounting system bolts quickly and easily to your machine—no drilling necessary! It’s small enough to keep on your machine all winter long, so when it’s time to get the job done, all that’s left to do is attach the blade and start clearing that snow.
- A winch is required to operate this snow plow.
- Installation requires drilling or removing front fascia.
- 72” snow plow blade
- Quick-connect snow plow mount
- Snow plow frame
- (2) Snow plow side shields
- Deflector and marker kit
- Plow angle actuator kit
- Yamaha Wolverine RMAX 2 1000 - 2021-2023
- Yamaha Wolverine RMAX 4 1000 - 2021-2023